KMC180 K 300KN

67,442 lb. (300kN) capacity. The KMC180 force transducers are designed with large contact surface for better distribution of forces. The load cells (called pancakes or compression discs) are in IP66. The force is introduced via the Ø30 mm through-hole. The measuring body is made of steel and protected against corrosion (nickel-plated). Despite the high forces, the force sensor has a low overall height. The force transducer is delivered calibrated including measurement protocol and has a 3 meter long connection cable. The sensor is often used in presses, testing machines, truck scales and large container and hopper scales.

Manufactured by Megatron

Please call us at 512-337-7336 to order.


Attribute Value
Series / Type Button (Pancake) Force Load Cell (Compression)
Capacity (Rated Force) 67,442 lb. (300kN)
Rated Output 3.0 mV/V nominal
Relative Repeatability Error ≤ 0.03% of rated output
Relative Reversibility Error ≤ 0.03% of rated output
Relative Linearity Error ≤ 0.03% of rated output
Relative Deviation of Zero Signal ≤ 1% of rated output
Rated Displacement ≤ 0.5mm
Input Resistance 775±20Ω
Output Resistance 700±5Ω
Insulation Resistance ≥ 500 MOhm @ 50 VDC
Maximum Operating Force ≤ 150% of Capacity
Rated Range of Excitation Voltage  10 VDC/VAC
Operating Range of Excitation Voltage ≤ 15 VDC/VAC
Rated Temperature Range -10ºC to +70ºC
Operating Temperature Range -10ºC to +40ºC
Temperature Effect on Output Value ≤ 0.02% of rated output / 10K
Temperature Effect on Zero Signal ≤ 0.02% of rated output / 10K
Creep Under Load ≤ 0.5% of rated output
Cable Dimension 4 x AWG24, PTFE isolated, shielded
Body Material Alloy steel
Protection Grade IP66
Mass 0.9 lb.